New Products

Pulsar Model PS4-54-452-11S covers a frequency range of 4-45 GHz with 0.7 dB of insertion loss and 18 dB isolation. Amplitude and phase balance are 0.5 dB and +/-6 degrees, respectively. VSWR is 1.9:1, power handling is 10 watts, and outline dimensions are 2.2 X 1.75 X 0.40 inches with 2.4 mm female connectors.

Specifications: PS4-54-452/11S
View our complete line of 4-Way Power Dividers/Combiners to 60 GHz,
or contact sales@pulsarmicrowave.com for additional information and pricing.

Pulsar P/N SW16AD-32 is a 16-throw, wideband absorptive microwave switch that operates continuously from 500 MHz to 10 GHz. It has a maximum insertion loss of 5.2 dB in any branch, a minimum isolation of 60 dB between branches and a maximum VSWR of 2:1. All ports have SMA female connectors. The switch requires a +/- 5VDC power supply and is controlled by TTL logic through a 15-pin ITT Cannon connector. The mechanical dimensions are 8.50 X 3.50 X 0.65 inches.

Specifications: SW16AD-32
View our complete line of SP16T RF Pin Diode Switches to 10 GHz,
or contact sales@pulsarmicrowave.com for additional information and pricing.

Pulsar Microwave’s SW16AD-21 wideband absorptive RF switch covers 500 MHz to 8 GHz with a maximum insertion loss of 4.5 dB. Isolation between outputs is 60 dB minimum, and VSWR at all ports is 1.9:1 maximum. The switch can handle up to 200 mW at the input, and has a switching time of 100 ns. The switch operates from a dual rail ±5V power supply and is controlled by TTL logic. Voltage connections are made through a 15-pin D-SUB connector. Overall case dimensions are 8.50 x 3.50 x 0.65 inches. SMA female connectors are standard, with output centers spaced .50 inches apart.

Specifications: SW16AD-21
View our complete line of SP16T RF Pin Diode Switches to 10 GHz,
or contact sales@pulsarmicrowave.com for additional information and pricing.

The SW16AD-20 from Pulsar Microwave is a 16-way absorptive RF switch that operates from 500 MHz to 4 GHz. It is rated for 200 mw input power and 100 ns switching time. Insertion loss is specified at 3.6 dB maximum, with a minimum isolation of 60 dB. VSWR of 1.8:1 or better maintained throughout frequency range at all ports. It has a system impedance of 50 ohms. The switch requires a supply of both positive and negative 5VDC and is controlled by TTL logic. Interface is via a 15-pin D-SUB connector. The case measures 8.50 X 3.50 X .65 inches overall. SMA female connectors are spaced at .50 inches between centers.

Specifications: SW16AD-20
View our complete line of SP16T RF Pin Diode Switches to 10 GHz,
or contact sales@pulsarmicrowave.com for additional information and pricing.