SP3T Pin Diode Switches
Absorptive and Reflective
Pulsar Microwave manufactures 3-way absorptive and reflective switches for use in 50-ohm systems. These SP3T switches operate from 100 MHz to 18 GHz and handle 200 mW input power. VSWR performance is often 1.6:1 or better with 100 ns switching time. Minimum isolation of 60 dB is specified for most units. Absorptive and reflective switches require +5V and -5V power supply to function. Control logic is from 0 to +5 volts. All voltage and ground connections are made by feed thru and turret terminals, respectively.
|
Input Frequency Range (GHz) |
Switch Type |
Insertion Loss (dB) max. |
Input Power mw/dBm |
Isolation (dB) min. |
VSWR |
Switching Time (nsec) |
Connector Type |
P/N | |
|---|---|---|---|---|---|---|---|---|---|
| Min | Max | ||||||||
| 0.1 | 1.0 | SP3T | 1.2 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW3AD-22 Add to RFQ |
| 0.5 | 2.0 | SP3T | 1.8 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW3AD-24 Add to RFQ |
| 1.0 | 4.0 | SP3T | 2.4 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW3AD-26 Add to RFQ |
| 0.2 | 6.0 | SP3T | 2.5 | 200/23 | 70 | 1.70:1 | 100 | SMA | SW3AD-28 Add to RFQ |
| 2.0 | 8.0 | SP3T | 3.2 | 200/23 | 55 | 1.60:1 | 100 | SMA | SW3AD-27 Add to RFQ |
|
Input Frequency Range (GHz) |
Switch Type |
Insertion Loss (dB) max. |
Input Power mw/dBm |
Isolation (dB) min. |
VSWR |
Switching Time (nsec) |
Connector Type |
P/N | |
|---|---|---|---|---|---|---|---|---|---|
| Min | Max | ||||||||
| 0.1 | 1.0 | SP3T | 1.0 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW3RD-22 Add to RFQ |
| 0.5 | 2.0 | SP3T | 1.6 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW3RD-24 Add to RFQ |
| 1.0 | 4.0 | SP3T | 1.6 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW3RD-26 Add to RFQ |
| 2.0 | 8.0 | SP3T | 2.2 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW3RD-27 Add to RFQ |
| 0.3 | 12.0 | SP3T | 2.5 | 200/23 | 60 | 1.90:1 | 100 | SMA | SW3RD-32 Add to RFQ |
| 0.3 | 18.0 | SP3T | 4.0 | 200/23 | 55 | 2.00:1 | 100 | SMA | SW3RD-33 Add to RFQ |
Specifications:
- Driver Schottky TTL
- Voltage/Current Required:
- +5 Vdc @ +70 mA, Typical
- -5 Vdc @ -50 mA, Typical
- Individual TTL Control Logic:
- Logic "0" (-0.3V to +0.8V) = ON
- Logic "1" (+2.0V to +5.0V) = OFF
- Higher speeds available.
| TTL Control Logic | |||||
|---|---|---|---|---|---|
| L1 | L2 | L3 | IN-J1 | IN-J2 | IN-J3 |
| 0 | 1 | 1 | Loss | Isol. | Isol. |
| 1 | 0 | 1 | Isol. | Loss | Isol. |
| 1 | 1 | 0 | Isol. | Isol. | Loss |