SP6T Pin Diode Switches
Absorptive and Reflective
The SP6T series of 6-way absorptive and reflective switches manufactured by Pulsar Microwave cover applications from 300 MHz to 12 GHz. They have an isolation of 60 decibels and most models specify 1.6:1 or better return loss throughout frequency band. These 6-way switches require a +/- 5VDC supply to operate. Switching control uses individual 0-5V TTL control logic. Voltage and logic control interfaces into a system using a 9-pin D-SUB connector installed.
|
Input Frequency Range (GHz) |
Switch Type |
Insertion Loss (dB) max. |
Input Power mw/dBm |
Isolation (dB) min. |
VSWR |
Switching Time (nsec) |
Connector Type |
P/N | |
|---|---|---|---|---|---|---|---|---|---|
| Min | Max | ||||||||
| 0.5 | 2.0 | SP6T | 2.5 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW6AD-10 Add to RFQ |
| 1.0 | 4.0 | SP6T | 2.7 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW6AD-11 Add to RFQ |
| 2.0 | 8.0 | SP6T | 3.7 | 200/23 | 60 | 1.70:1 | 100 | SMA | SW6AD-12 Add to RFQ |
|
Input Frequency Range (GHz) |
Switch Type |
Insertion Loss (dB) max. |
Input Power mw/dBm |
Isolation (dB) min. |
VSWR |
Switching Time (nsec) |
Connector Type |
P/N | |
|---|---|---|---|---|---|---|---|---|---|
| Min | Max | ||||||||
| 0.5 | 2.0 | SP6T | 2.2 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW6RD-10 Add to RFQ |
| 1.0 | 4.0 | SP6T | 2.4 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW6RD-11 Add to RFQ |
| 2.0 | 8.0 | SP6T | 3.2 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW6RD-12 Add to RFQ |
| 0.3 | 12.0 | SP6T | 3.4 | 200/23 | 60 | 2.00:1 | 100 | SMA | SW6RD-13 Add to RFQ |
Specifications:
- Driver Schottky TTL
- Voltage/Current Required:
- +5 Vdc @ +100 mA, Typical
- -5 Vdc @ -40 mA, Typical
- Individual TTL Control Logic:
- Logic "0" (-0.3V to +0.8V) = ON
- Logic "1" (+2.0V to +5.0V) = OFF
- ITT Cannon, 9 Pin:
- Pin 1 = J1 (Control)
- Pin 2 = J2
- Pin 3 = J3
- Pin 4 = J4
- Pin 5 = J5
- Pin 6 = J6
- Pin 7 = GROUND
- Pin 8 = +5V
- Pin 9 = -5V
