SP5T Pin Diode Switches
Absorptive and Reflective
Pulsar Microwave's 5-way RF switches cover bands from 300 MHz to 12 GHz in both absorptive and reflective configuration. These SP5T switches have a rating of 200 mW maximum input power and a switching time of 100 ns. They are specified with a minimum isolation of 60 dB and most models maintain a VSWR of 1.6:1 or better on all ports. The SP5T switches are driven by TTL logic control circuitry and require both positive and negative 5-volt supplies for operation. A 9-pin D-SUB connector provides the interface for the power and logic voltages.
|
Input Frequency Range (GHz) |
Switch Type |
Insertion Loss (dB) max. |
Input Power mw/dBm |
Isolation (dB) min. |
VSWR |
Switching Time (nsec) |
Connector Type |
P/N | |
|---|---|---|---|---|---|---|---|---|---|
| Min | Max | ||||||||
| 0.5 | 2.0 | SP5T | 2.2 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW5AD-10 Add to RFQ |
| 1.0 | 4.0 | SP5T | 2.5 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW5AD-11 Add to RFQ |
| 2.0 | 8.0 | SP5T | 3.5 | 200/23 | 60 | 1.70:1 | 100 | SMA | SW5AD-12 Add to RFQ |
|
Input Frequency Range (GHz) |
Switch Type |
Insertion Loss (dB) max. |
Input Power mw/dBm |
Isolation (dB) min. |
VSWR |
Switching Time (nsec) |
Connector Type |
P/N | |
|---|---|---|---|---|---|---|---|---|---|
| Min | Max | ||||||||
| 0.5 | 2.0 | SP5T | 2.0 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW5RD-10 Add to RFQ |
| 1.0 | 4.0 | SP5T | 2.2 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW5RD-11 Add to RFQ |
| 2.0 | 8.0 | SP5T | 2.8 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW5RD-12 Add to RFQ |
| 0.3 | 12.0 | SP5T | 3.0 | 200/23 | 60 | 2.00:1 | 100 | SMA | SW5RD-13 Add to RFQ |
Specifications:
- Driver Schottky TTL
- Voltage/Current Required:
- +5 Vdc @ +90 mA, Typical
- -5 Vdc @ -40 mA, Typical
- Individual TTL Control Logic:
- Logic "0" (-0.3V to +0.8V) = ON
- Logic "1" (+2.0V to +5.0V) = OFF
- ITT Cannon, 9 Pin:
- Pin 1 = J1 (Control)
- Pin 2 = J2
- Pin 3 = J3
- Pin 4 = J4
- Pin 5 = J5
- Pin 6 = N/C
- Pin 7 = GROUND
- Pin 8 = +5V
- Pin 9 = -5V
